KEB COMBIVERT F5 MULTI User Manual

9
9
19
KEB COMBIVERT F5
Name: Basis
04.05.04
9
Error Assistance
Section PageDate
© KEB Antriebstechnik, 2002
All Rights reserved
Chapter
A.SbuS ABN.Bus synchron 103 Synchronization over sercos-bus not possible. The response
to this warning can be programmed (see chapter 6.7
“Response to errors and warning messages”).
A.SEt ABN.STOP set 102 Warning: set selection: It has been attempted to select a
locked parameter set. The response to this warning can be
programmed (see chapter 6.7 “Response to errors or warning
messages”).
A.SLF ABN.Software limit switch forward 104 The target position lies outside of the limit defined with the
right software limit switch. The response to this warning can
be programmed (see chapter 6.7 “Response to errors or
warning messages”).
A.SLr ABN.Software limit switch reverse 105 The target position lies outside of the limit defined with the
left software limit switch. The response to this warning can
be programmed (see chapter 6.7 “Response to errors or
warning messages”).
Display COMBIVIS Value Meaning

KEB COMBIVERT F5 MULTI Specifications

General

Brand	KEB
Model	COMBIVERT F5 MULTI
Category	DC Drives
Language	English