KEB COMBIVERT F5 Servo

67 1
KEB COMBIVERT F5
Name: Basis
04.05.04
Functional Description
Chapter
Section
Page
Date
© KEB Antriebstechnik, 2002
All rights reserved
1. Introduction
2. Summary
3. Hardware
4. Operation
5. Parameter
6. Functions
7. Start-up
8. Special Operation
9. Error Assistance
10. Project Planning
11. Networks
12. Annex
6.1 Operating and Applicance
Date
6.2 Analog In- and Outputs
6.3 Digital In- and Outputs
6.4 Set Value and Ramp
Adjustment
6.5 Voltage-/Frequency
Characteristic (U/f)
Adjustment
6.6 Motor Data Adjustment
6.7 Protective Functions
6.8 Parameter Sets
6.9 Special Functions
6.10 Encoder Interface
6.11 SMM, Posi, Synchron, CTM
6.12 Technology Control
6.13 CP-Parameter Definition
6.7.1 Ramp Stop and Hardware
Current Limit........................... 3
6.7.2 Maximal Constant Current ..... 5
6.7.3 Automatic Restart and Speed
Search.................................... 7
6.7.4 Dead Time Compensation...... 9
6.7.5 Base-Block Time and Voltage
Level....................................... 9
6.7.6 Response to Errors or Warning
Signals ................................... 9
6.7.7 Fast Stop.............................. 13
6.7.8 Motor Protection Mode ......... 15
6.7.9 GTR7-Control........................ 19
6.7.10 Special Functions ................. 20