KEB F6 Series User Manual

6.7.4 Flash le system parameters (FI)
FI00 Max. bytes Parameter address 0x2480
Value Description
Displays the maximum number of possible bytes.
FI01 Max. les Parameter address 0x2481
Value Description
Displays the maximum number of possible les.
FI02 Used bytes Parameter address 0x2482
Value Description
Displays the number of the used bytes.
FI03 Used les Parameter address 0x2483
Value Description
Displays the number of the used les.
FI04 Deleted bytes Parameter address 0x2484
Value Description
Displays the number of the deleted bytes.
FI05 Deleted les Parameter address 0x2485
Value Description
Displays the number of the deleted les.
FI06 Free bytes Parameter address 0x2486
Value Description
Displays the number of free bytes.
FI07 Flash function Parameter address 0x2487
Value Description
0…256 Displays the state of the ash system and if necessary, is used to format the memory
(value = 660 "user read/write“ - password required).
NOTICE
Loss of important system les!
Formatting is normally never required and leads to the
loss of important system les, which must be transferred
again.
34
NAVIGATION

KEB F6 Series Specifications

General

Communication Interfaces	RS-485, Modbus RTU, CANopen
Protection	Overcurrent, overvoltage, undervoltage, short circuit
Operating Temperature	-10°C to +40°C
Humidity	Up to 95% relative humidity, non-condensing
Control Modes	sensorless vector control (ASCL), closed-loop vector control (encoder feedback)