KEF LSX - Page 68

68
Table of ContentsSetting Up the LSXUsing the KEF Control AppPlayback and StreamingFAQ and Troubleshooting
Speaker Pattern Status
Master Flashing blue The speakers are muted in Bluetooth mode.
Master Flashing purple The speakers are muted in Optical Mode.
Master Flashing yellow The speakers are muted in AUX Mode.
Master
Flashing white and
blue
The Master Speaker is in wireless pairing mode
searching for the Slave Speaker.
1. Make sure Cable Mode is disabled on the KEF
Control app (Settings > Cable Mode).
2. On the Slave Speaker, press the (M) M/S Pairing
button once. The Slave Speaker will search for
the Master Speaker for reconnection.
Master
and slave
Flashing light blue and
yellow
Cable Mode is enabled and the connection
between the speakers is interrupted.
1. Make sure the inter-speaker cable is connected
between the Master and the Slave Speakers.
2. Make sure the inter-speaker cable is inserted in
the correct connection ports:
“(T) To Slave” on the Master Speaker and “(T)
To Master” on the Slave Speaker.
Slave No LED light The Slave Speaker is operating normally.
Slave
Flashing white and
blue
The Slave Speaker is in the wireless pairing mode
searching for the Master Speaker.
1. Make sure Cable Mode is disabled on the KEF
Control app (Settings > Cable Mode)
2. On the Master Speaker, press the (M) M/S
Pairing button once. The Master Speaker will
search for the Slave Speaker for reconnection.