Saving
Select presets from the menu, name them in the text
box, and save or revert them with the “Save Preset”
and “Revert” buttons. Press the “Update Preset”
button to send the current preset to the QuNeo or press
the “Update All” button to send all of the presets to the
QuNeo.
If edits are made to the selected preset, the Save
Preset button will begin to blink red as a reminder to
save. Click the save button to save the selected preset,
and it will cease to blink red. Modified/unsaved presets
will appear in the preset list with an asterisk until they
are saved.
Click the Revert button to go back to the previously
saved state of the current preset.
In the menu, the presets are listed by number to correspond with the pad numbering when
selecting presets from the QuNeo (see the Selecting Presets chapter for more information).
Menu Bar
More functions can be accessed from the File menu. “Save
Preset” exists here as well as “Save All Presets”. “Import
Presets” opens previously exported presets into the currently
selected preset slot. “Export Presets” will save a file containing
the currently selected preset for safe keeping or sharing.
“Export All Presets” will save 16 files, 1 for each preset.
Importing and Exporting makes preset sharing easy.
The Edit menu contains copy and paste functions. “Copy
Current Preset” will put the current preset onto the
application’s clipboard. To paste a copied preset into a different
preset, use the “Paste to Current Preset” option. It will then
be necessary to save the pasted preset.
“Copy Sensor” places parameters from the current sensor’s edit
pane on the clipboard. Selecting another sensor of the same
type enables the “Paste Sensor” option.
“Clear Current Preset” will blank out the current preset. All sources will be off and
everything else will be set to their default values, allowing the user to start from scratch.
After clearing the current preset, it is necessary to save it. “Revert Current Preset to
Factory” reloads the original preset into the current preset slot. “Revert All Presets to
Factory” reloads all of the original presets. After reverting to the factory presets, save to
keep the factory versions.
“Edit Next Sensor” and “Edit Prev Sensor” allows the use of key commands to move to
the next edit pane.
45
To Next Page
Loading...
Need help?
General