Welcome
QuNeo is a 3D multi-touch pad controller. QuNeo is a different species of pad controller for
electronic musicians, DJs, VJs and DIY hackers. While it covers all of the functionality of
other pad controllers, QuNeo adds the power of touch recognition in multiple dimensions.
Each of the 27 pads, sliders, and rotary sensors are pressure, velocity, and location
sensitive. The 17 buttons also respond to pressure and velocity. The 16 square pads
provide 128 levels of velocity response, X-Y location, and continuous pressure for each pad.
Each rotary sensor measures direction, pressure and location.
QuNeo is the size of an iPad and can fit in iPad accessories such as mic clips, stands and
more. QuNeo works with USB, MIDI or OSC and will communicate with your favorite music
software environments right out of the box.
In this manual you will find detailed information to help answer all of your questions about
QuNeo hardware and software.
Questions or Feedback? Contact Us!
If at any time you have any questions, please contact us:
Web: www.keithmcmillen.com
Forum: forum.keithmcmillen.com
Support: http://www.keithmcmillen.com/support
What's in the QuNeo Package
When you open up the box you should find:
● (1) QuNeo
● (1) USB A-to-Micro cable (1 meter)
● (1) QuNeo QuickStart Document
QuNeo Hardware
Dimensions: 9.5” x 7.3” x .3” (inches). The pads are about 1.2” x 1.2”.
Weight: 14 oz.
There are no user serviceable parts inside QuNeo. Attempts to open the enclosure will
void the warranty.
USB Port
QuNeo is connected to a computer and powered by a USB A-to-Micro cable. It is a class
compliant USB device and does not require a driver. This allows for maximum
compatibility with an extremely wide range of other devices.
5
To Next Page
Loading...
Need help?
General