The Tables window is accessible from the
Hardware Menu. When you first open it you will
see the window shown above.
You can select a table to view in the menu in the
bottom right corner. If you select “Custom 1” or
“Custom 2” the tables become editable.
When the table is editable, the line will turn
green (as shown in the image to the right). You
will be able to click the buttons along the bottom
of the window to start with one of the other
curves.
To use one of the Custom Tables, you must
make sure to select “Custom 1” or “Custom 2” in
the Curve column of Keyboard Layer or CV
Layer.
To Next Page
Loading...
