Keith McMillen Instruments QuNexus Reference Manual

3.9.1.3 Controller Layer Toggle
There is a dedicated CC# for Toggling in Controller Layer. This has nothing to do with the Toggle
options in Keyboard Layer. In fact, you must disable “Participate in Keyboard Layer” in order to
use the Toggle CC#. This is because Keyboard Layer has it’s own built in Toggle behavior which
cannot interact with Controller Layer’s Toggle.
With Keyboard Layer disabled, to use toggle in Controller Layer, turn the Toggle On/Off check
box on and set the Toggle CC, Toggle CC Value, and Toggle CC Return parameters.
Toggle CC - This is where you choose which CC number will toggle.
Toggle CC Value - This represents the CC value that will output when the Toggle state is ON.
Toggle CC Return - This represents the CC value that will output when the Toggle state is OFF.
Any Notes assigned on the same Controller Layer key with Toggle enabled will toggle with the
CC number. The Note Velocity number box will be the velocity that outputs when the Toggle
state is ON. The LEDs will indicate the toggle state.
47

Keith McMillen Instruments QuNexus Specifications

General

Brand	Keith McMillen Instruments
Model	QuNexus
Category	Electronic Keyboard
Language	English