SoftStep3 hardWare
13
SoftStep3
Each CC should be sent with a value between 48 and 122� These values correspond to the following:
48-57 = Numbers 0-9
65-90 = Capital letters A-Z
97-122 = Lowercase letters a-z
58-64 & 91-96 = various symbols/characters
For example, to make the third character on the display show the number “3”, send CC 52 with a value of 51�
ChanGinG preSetS With proGraM ChanGeS
When in Standalone mode, Program Change messages 1 through 16 sent to the SoftStep Control Surface
port will select the corresponding preset in the setlist — e�g� sending program change 7 will load the seventh
preset in the setlist�
When in Hosted mode, Program Change messages 1 through 16 sent to the SoftStep Share port on Channel
16 will select the corresponding preset in the setlist�
To Next Page
Loading...