SoftStep advanCed editor
45
SoftStep3
edit
Copy preSet
Copies the currently selected preset� Can be used later to paste over a preset or paste to a new preset�
paSte preSet
Pastes a copied preset to the currently selected preset� This option is only available if a preset has already
been copied�
Note: Copy and Paste can be used to transfer presets from Hosted mode to Standalone mode (and vice
versa)� Make sure that available sources are compatible in both modes�
paSte preSet to neW
Pastes a copied preset to a brand new preset� This option is only available if a preset has already been
copied�
Copy key
Copies the currently selected key’s settings (click a key box in the main window to select a key for
copying)�
paSte key
Pastes the settings from a previously copied key to the currently selected key�
hardWare
Calibrate expreSSion pedal
Opens the Expression Pedal Calibration Window� For more information see <link to section>
Calibrate Cv oUtS
Opens the CV calibration window� For more information see <link to section>
forCe firMWare Update
Forces a rmware update
diSplay hardWare reviSion
You can select which hardware is connected, or autodetect� This will show or hide elements of the Editor
that are not available to earlier hardware (eg the CV Out controls, LED brightness, etc)�
To Next Page
Loading...