SoftStep advanCed editor
36
SoftStep3
flaSh falSe
The LED will continuously ash when the modline is equal to 0. It will turn off when the modline value
is 1 or greater�
flaSh faSt trUe
The LED will continuously ash quickly when the modline value is 1 or greater. It will turn off when the
modline value is equal to 0�
flaSh faSt falSe
The LED will continuously ash quickly when the modline value is equal to 0. It will turn off when the
modline value is 1 or greater�
blink trUe
The LED will blink once when the modline value is 1 or greater� Nothing will happen when the modline
value is equal to 0�
blink falSe
The LED will blink once when the modline value is equal to 0� Nothing will happen when the modline
value is 1 or greater�
off
Turns the LED off when a value of 1 or greater is received
nav pad ModUlation WindoW
The Nav Pad’s modulation window has a few differences from the other keys’ modulation windows Most
signicantly, the Nav Pad has a Mode setting in the top-left corner with two options:
• Modline: Use the Nav Pad with the modlines like a normal key�
• Program Change: This mode allows the Nav Pad to count “decades” in increments of 10 from the Min
to the Max Count values for use with the Nav Yx10 & Key source — This option will disable the use of
modlines on the Nav Pad�
The Nav Pad also has unique Data Sources� The following sources are exclusive to the Nav Pad:
nav y(hoSted Mode only)
Pressing up on the Nav Pad (the north key) increments the Nav Pad’s counter — pressing down on the Nav
Pad (the south key) decrements the counter�
nav y deCade (hoSted Mode only)
Pressing up/down on the Nav Pad increments/decrements through the Nav Pad’s counter and multiplies
the value by 10� This results in a “decade” value (e�g� 20s, 30s, 40s, 50s, etc�)� Stepping on a key using the
Nav Yx10 & Key will then add that key number to the decade value�
The decades range can be adjusted using the min and max options in the Nav Pad counter�
To Next Page
Loading...