SoftStep advanCed editor
22
SoftStep3
advanCed editor
While the Basic Editor covers the most commonly used functions, sometimes more complex setups are desired —
that is where the Advanced Editor comes into play�
The SoftStep Advanced Editor allows for up to 16 fully customizable presets — each key can have multiple functions,
LED behavior can be customized, and more sensor response settings allow for ne-tuning the SoftStep’s playability.
3.1 hoSted vS. Standalone
The SoftStep Advanced Editor can operate in two different modes, Hosted mode and Standalone mode�
hoSted Mode
In Hosted mode, the SoftStep hardware is tethered to the SoftStep Editor software� The SoftStep sends raw
sensor data to the SoftStep Editor, and the Editor then processes it into the correct MIDI messages (as dened by
the modlines), then outputs it over the virtual MIDI port, SoftStep Share� (Windows users should see the SoftStep
Share section for more info on Virtual MIDI Ports)�
Hosted Mode has more features and options available, but requires the SoftStep be connected to the Editor to
function� These features include���
State reCall
State recall is only available in Hosted mode� X/Y Increment, toggle, and LED states will be remembered
when switching between presets�
live editor feedbaCk
When running the editor in Hosted mode the modlines provide live feedback — the raw, result, and value
number boxes update in real time�
Modline SoUrCeS and MeSSaGe typeS
Hosted mode has more options in the modline Source list� Hosted Mode only sources include MIDI A-H, Top,
Bottom, the trigger latch sources, and a variety of Nav Pad sources� Message types only available in Hosted
mode include OSC, Garageband, Aftertouch, Poly Aftertouch, Y Inc Set, and X Inc Set�
A complete list of sources and messages types can be found in the Sources and Message Types section�
adjaCent key loCkoUt
The Adjacent Key Lockout key safety setting is only available in Hosted mode�
Standalone Mode
When in Standalone mode, all MIDI data comes directly from the SoftStep� The Editor does not need to be
running in order to operate the SoftStep in Standalone mode� Standalone mode can function without being
plugged into a computer at all�
To Next Page
Loading...