Keith McMillen Instruments SoftStep3 - Data Modifiers

SoftStep advanCed editor
28
SoftStep3
key 0-9 preSSed
Outputs a 127 when the corresponding key is pressed — e�g� Key 4 Pressed will output a 127 whenever
key 4 is pressed� This source is great for turning other keys’ LEDs on/off�
other key preSSed
Placing this on a key will output a 127 when a different key is pressed, and output a 0 when the key this is
assigned to is pressed� Example: place this on key 2 — it will output a 0 when key 2 is pressed and output a
127 when any other key is pressed�
Modline 1-6 oUtpUt
Uses the nal output value from another modline (1-6) and sends it through the modline this source is
assigned to� Great if any extra data processing for more complex setups is needed�
Midi a-h (hoSted Mode only)
Receives the values from the MIDI inputs assigned in the Settings window and passes them through the
modline�
oSC a-h (hoSted Mode only)
Receives the values from the OSC inputs assigned in the Settings window and passes them through the
modline�
data ModifierS
Data owing from the sensor source runs through a series of modiers to scale, constrain and otherwise
shape the values being sent to the Output Settings section of the modline�
Gain
Multiplies incoming values by the specied amount. Defaults to 1.00.
offSet
Adds the specied amount to incoming values. Use negative numbers for subtraction. Defaults to 0.
reSUlt (hoSted Mode only)
A live display of the modline values after passing through the gain and offset stage�