SoftStep advanCed editor
24
SoftStep3
(2) diSplay naMe box
The display name box is used to set the name that appears on the SoftStep’s display when a preset is loaded
(four characters maximum)�
(3) preSet SeCtion
Select a preset from the drop down menu� Save or Save As, Revert or Delete presets�
(4) hoSted/Standalone SWitCh
Switch between Hosted and Standalone mode�
(5) SetliSt bUtton
Opens the Setlist window, where you set the order of the presets saved to the SoftStep�
(6) SettinGS bUtton
Opens the Settings window to adjust global SoftStep settings�
(7) ConneCtion indiCator
“SoftStep Connected” will display when a SoftStep is plugged in and recognized by the Editor software�
(8) Cv SeCtion
Set the CV messages that will go out the two CV outputs�
To Next Page
Loading...