Keithley 2701 Instruction Manual

Index
A
Address restrictions 3-4
B
Built-in web diagnostic tool 4-3
C
Changing Model 2701 TCP/IP addresses 3-7
classes 3-4
Communication Protocol 3-2
Configuration in Windows 2000 3-13
Configuration in Windows 95/98/ME 3-11
Configuration in Windows NT4 3-12
Configuration in Windows XP 3-14
Configuring a Network Interface Card
(NIC) 3-10
Configuring TCP/IP addresses 3-1
Connector location 1-4
Contact information 1-3
Corporate network connection 2-8
Cross over cables A-3
D
DCHP 3-2
default TCP/IP addresses 3-7
Direct connection 2-3
Direct connection (isolated network) 3-4
DNS 3-3, 3-11, 3-12
Window 98/ME 3-11
Windows 2000 3-13
Windows NT4 3-12
Windows XP 3-14
drivers 4-10
Dual interface card connection 2-6
E
Ethernet Cables A-2
Ethernet interface 1-3
ExceLINX-1A 4-8
F
Features 1-3
G
General information 1-2
Glossary B-1
H
Hub connection 2-4
I
Instrument Driver 4-6
Interchangeable Virtual Instruments 4-6
Internal Web Page 3-9
IP address byte location sample 3-6
ipconfig 3-10
IS department 3-2
IT/IS 3-3
M
Model 2701 Rear Panel 1-4
P
Provided software 4-4
S
Selecting an address 3-5
Software and drivers 4-1, 4-10
software applications 4-8
Software Architecture 4-2
Status LEDs 1-5
Straight through cables A-2
Supported environments 1-5
T
Test point software 4-4
TestPoint Application Development
Package 4-9
TestPoint runtime 4-4

Keithley 2701 Specifications

General

Max Voltage	300 V
Max Current	3 A
Frequency Range	3 Hz to 500 kHz
Frequency Accuracy	0.01%
Weight	3.6 kg
Measurement Functions	Frequency, Temperature
Interface	IEEE-488 (GPIB), RS-232
DC Voltage Range	300 V
DC Current Range	3 A
AC Voltage Range	300V
AC Current Range	1 μA to 3 A
Resistance Accuracy	0.01%
Channels	10
Dimensions	213mm x 88mm x 370mm