1
Test System Overview
•
Introduction
— Summarizes the switching modules that are used with the
Model 2790 to test inflators. Covers some key features of the Model 2790 and
defines/explains technical terms associated with airbag inflators.
•
Model 2790 configurations
— Explains the various mainframe/module combina-
tions available from Keithley.
•
Test system
— Shows a typical test system used to test inflators.
•
Inflator tests
— Explains the three basic tests for inflators: shunt bar, bridgewire,
and insulation resistance (HIPOT).
To Next Page
Loading...
