Keithley 2790 - Figure 2-2 Setting I-Source and V-Source Output Levels

Model 2790 SourceMeter
®
Switch System User’s Manual 2-7
Figure 2-2
Setting I-source and V-source output levels
SHIFT
CARD
CONFIG
SLOT1: 77xx
I-C27:01.00 mA
V-C28:050.0 V
I-C27:01.00 mA
7751
7752
7753
V-C28:050.0 V
7751
7753
Press
Press
Select
Select module
77xx =7751/7752/7753
Set I-source
output
Set V-source
output
SLOT2: 77xx
7751
7752
7753*
7751
7753*
* 7753 should be installed in slot 1 for rated accuracy.