Model 2790 SourceMeter
®
Switch System User’s Manual 2-15
Viewing closed channels
Closed channels can be viewed from the VIEW item of the CARD menu. The menu struc-
ture is accessed by pressing and releasing SHIFT and then pressing CARD. As shown in
Figure 2-5, the closed channels will scroll across the display:
• The four dots (....) identify the end of the channel string.
• Use the ENTER key to pause and resume scrolling.
• Press EXIT to return to the normal display state.
NOTE For remote programming, closed channels can be identified using
ROUT:MULT:CLOS? and ROUT:MULT:CLOS:STAT? (see Table 2-3).
Figure 2-5
Viewing closed channels
SHIFT
CARD
VIEW
SLOTx: 77xx
Press
Press
Select
Select module
Closed channels
scrolled*
101, 114, 118 ....
Shows channels 101, 114,
and 118 closed.
*
SLOTx = Slot1 or Slot2
77xx = 7751/7752/7753**
** 7753 should be installed in
slot 1 for rated accuracy.
To Next Page
Loading...
