Kemper WeldFil Compact - W3;IFA Certification Distinction; Indoor vs. Outdoor Version Differences

EN
1502756-02 - 121 -
1
Main menu
2
Message: Run-down time of
the frequency converter (fan)
active for 29 seconds
Tab. 48: Run-down time
3.3 Distinguishing feature – W3/IFA certified
The product is manufactured in two versions:
• Version – non-IFA certified
• Version – IFA certified
See also chapter "Technical data": Welding fume class and IFA test
standard.
The standard version of the product is IFA certified.
This means that the product fulfils the requirements of the ‘W3/IFA
certified’ welding fume separation class. Adherence to this standard is
certified by the IFA (Institute for Occupational Safety and Health of the
German Social Accident Insurance).
For the sake of simplification, in this operation manual this is indicated in
the following with an IFA notice logo.
The IFA notice logo highlights important notes and information relating to
the IFA product.
Labelling on the
product
Meaning/explanation
Reference
logo
IFA
Type "IFA certified" according to
test standard – see chapter
"Technical data"
Tab. 49: IFA label
The IFA version is marked, on the product, with the DGUV test symbol and
a W3/IFA certified (identification of the welding fume class) label.
3.4 Distinguishing features between the indoor and outdoor
versions
The product is manufactured in two versions:
• Model – as an indoor version
• Model – as an outdoor version (optional)