Kemper WeldFil Compact - Calibrating the Control Display

EN
1502756-02 - 159 -
6.2.10 Calibration of the control display
Fig. 88: Calibrating the control display
Item
Description
Item
Description
1
Settings menu
4
Current date and time
2
Calibrating the control
display – make settings
5
Page 2 of 9
3
Setting/Confirming
Tab. 73: Calibrating the control display
If touchscreen operation becomes inaccurate or the control display does
not react correctly to entries, the touchscreen must be recalibrated. To do
this, please (Item 2) tap the “Calibrate control display” button. Then follow
the instructions on the screen.