Kemper WeldFil Compact - Frequency Converter Error Messages; System Warnings and Notifications

EN
1502756-02 - 162 -
6.2.12 Error messages for optional extraction capacity
regulation
If there is an error in the frequency converter, the following message
appears on the control display:
Fig. 91: Frequency converter error message
Item
Description
Item
Description
1
Fault: Frequency converter
fault
4
Error indicator (number of
error messages)
2
Error/Fault
5
Acknowledgement of error
message
3
Hide fault message
6
Show info text for error
message
Tab. 75: Frequency converter error message
Please contact our service department if this error message is displayed.
6.2.13 Warnings
Warnings are used to notify the system operator of non-critical system
conditions or pending maintenance.