Kemper WeldFil Compact - Setting System Parameters

EN
1502756-02 - 157 -
6.2.9 Setting the system parameters
Fig. 86: Parameter settings
Item
Description
Item
Description
1
Settings menu
3
Fan run-on time
2
Number of cleaning
processes
4
Page 1 of 9
Tab. 71: Parameter settings
The following system parameters can be modified in the Settings (Pos. 1)
menu:
• Fan run-on time (only if “external on/off” option is activated)
• Number of filter cleaning cycles when at a standstill
• Time and date
Note: The product setting parameters are access-protected and can only
be changed by authorised specialist personnel.