Kemper WeldFil Compact - Connecting the Outdoor Version

EN
1502756-02 - 133 -
5.3 Connecting the product (outdoor version)
The optionally available outdoor version of the product is intended for
installation outside buildings.
In the outdoor version, the compressed air maintenance unit is placed
separately in a frost-proof space outside the product.
Fig. 70: Compressed air unit (outdoor version)
Ite
m
Description
Ite
m
Description
1
Compressed air maintenance
unit
4
Compressed air vessel
connection (product)
2
Compressed air unit (product)
5
Compressed air supply
connection (compressed air
network/compressor)
3
Compressed air connection
lifting device
Tab. 51: Compressed air unit
1. Install the compressed air maintenance unit (Pos. 1) outside the product
in a frost-proof space.
2. Connect the compressed air maintenance unit to the on-site
compressed air network. (Item 5)