Kemper WeldFil Compact - Page 164

EN
1502756-02 - 164 -
automatically controls the fan speed so that there is always a constant
extraction capacity at the individual central extraction systems.
The product therefore only works demand-oriented, which results in the
following advantages:
• Constant extraction capacity on each central extraction system
• Energy saving due to optimum fan speed (energy efficiency).
• Protects filters and product components (longer service life)
• Reduction of noise emissions (health and safety).
DANGER
Danger of electric voltage!
The extraction capacity can only be set in the switched-on operating
mode and when the control cabinet is open.
Adjustment work may only be carried out by a qualified electrician or the
manufacturer's service department.
To adjust the extraction capacity, proceed as follows:
Example illustration:
Fig. 93: Setting the extraction capacity regulation