X8 MIG WELDER 2.9 Disposal of unit
Table 18: Accessories
Accessory Ordering code
X8 Accessory Tray X8701040000
X8 Cable Rack X8701030000
X8 Gas Cylinder Cart X8701020000
Wire Feeder Rotating Plate X8702010000
Double Wire Feeder Rotating Plate X8702020000
Wire Feeder Hanger for Boom X8702040000
Wire Feeder Counterbalance Arm X8702030000
Table 19: Software products
Software products Ordering code
DProcess
WeldEye WP & PQ Cloud Package (Enabling digital
WPS)
6800010
WiseFusion X8500000
WisePenetration+ X8500002
WiseRoot+ X8500003
WiseSteel X8500001
WiseThin+ X8500004
For the ordering codes of consumable kits for the guns and wire feeder, see kitselect.kemppi.com. For the
ordering codes of welding program packs, see Kemppi DataStore.
2.9 Disposal of unit
Note:
Do not dispose of any electrical equipment with normal waste!
At the end of the useful working life of the unit and its accessories, make sure that you follow national and
local regulations regarding the disposal of the unit. The unit includes some parts that include or are made of
non-environmentally friendly or hazardous materials.
In observance of WEEE Directive 2012/19/EU on waste of electrical and electronic equipment and European
Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic
equipment, and their implementation in accordance with national law, electrical equipment that has reached
the end of its life must be collected separately and taken to an appropriate environmentally responsible
OPERATING MANUAL | EN 193
©
KEMPPI | 2018-09-28
To Next Page
Loading...
Need help?
General
