Kemppi X8 MIG - X8 Power Source 600 a; 600 a MV

X8 MIG WELDER 2.7 Technical data
ValueFeature Description
500 A 500 A MV
Standards IEC 60974-1,-10 IEC 60974-1,-10
2.7.3 X8 Power Source 600 A / 600AMV
ValueFeature Description
600 A 600 A MV
Mains connection cable H07RN-F 6mm² 16mm²
Mains connection voltage 3~50/60Hz 220-230V ±10%
Mains connection voltage 3~50/60Hz 380-460V ±10% 380-460V ±10%
Rated power
40%ED 33kVA 33kVA
60%ED 27kVA 27kVA
100%ED 21kVA 21kVA
Supply current (maximum) I1max
@220-230V
-
86-83A
I1max
@380-460V
50-42A 50-42A
Supply current (effective) I1eff @220-230V
-
57-53 A
I1eff @380-460V 33-27A 33-27A
Idle power without cooler and wire feeder
(MIG)
P
i
45-52W 40-52W
Idle power with cooler, without wire
feeder (MIG)
P
i
51-58W 48-58W
Open circuit voltage (MMA) U
av
50V 50V
Open circuit power (MMA) (without cooler
and wire feeder, fans OFF)
P
i
44-53W 44-53W
Open circuit power (MMA) (without cooler
and wire feeder, fans ON)
P
oc
107-111W 99-111W
Open circuit power (MMA) (with cooler,
without wire feeder, fans ON)
P
oc
132-137W 121-137W
No-load voltage (MIG & MMA)
U
0peak
76-92VDC 76-92VDC
No-load voltage (MMA)
U
r peak
72-86VDC 72-86VDC
Fuse 220-230V - 63A
OPERATING MANUAL | EN 178
©
KEMPPI | 2018-09-28