X8 MIG WELDER 2.7 Technical data
ValueFeature Description
400 A 400 A MV
Wireless communication type
• Transmitter frequency and power
2.4GHzWiFi &
Bluetooth
2.4GHz Bluetooth and
WLAN
• 2400-2483.5MHz
20dBm
2.4GHzWiFi &
Bluetooth
2.4GHz Bluetooth and
WLAN
• 2400-2483.5MHz
20dBm
Wired communication type Ethernet & USB Ethernet & USB
Standards IEC 60974-1, -10 IEC 60974-1, -10
2.7.2 X8 Power Source 500 A / 500AMV
ValueFeature Description
500 A 500 A MV
Mains connection cable H07RN-F 6mm² 16mm²
Mains connection voltage 3~50/60Hz - 220-230V ±10%
Mains connection voltage 3~50/60Hz 380-460V ±10% 380-460V ±10%
Rated power 40%ED - -
60%ED 26kVA 26kVA
100%ED 18kVA 18kVA
Supply current (maximum) I
1max
@220-230V
- 67-66A
I
1max
@380-460V
38-33A 38-33A
Supply current (effective) I
1eff
@220-230V - 52-51A
I
1eff
@380-460V 29-26A 29-26A
Idle power without cooler and wire
feeder (MIG)
P
i
45-52W 40-52W
Idle power with cooler, without wire
feeder (MIG)
P
i
51-58W 48-58W
Open circuit voltage (MMA) U
av
50V 50V
Open circuit power (MMA) (without
cooler and wire feeder, fans OFF)
P
i
44-53W 44-53W
Open circuit power (MMA) (without
cooler and wire feeder, fans ON)
P
oc
107-111W 99-111W
Open circuit power (MMA) (with cooler,
without wire feeder, fans ON)
P
oc
132-137W 121-137W
OPERATING MANUAL | EN 176
©
KEMPPI | 2018-09-28