X8 MIG WELDER 2.7 Technical data
2.7.13 X8 MIG Gun WS 420-w
Feature Description Value
Welding process MIG/MAG
Method of guidance Manual
Type of cooling Liquid
Coolant flow rate 1l/min
Coolant pressure (max) 5bar
Type of connection Kemppi
Wire diameters 1.2 - 1.6 mm
@60% (MIXED GAS) -
@100% (MIXED
GAS)
300A
@60% (CO
2
) -
Load capacity
@100% (CO
2
) -
Ss 1.2 - 1.6mmFiller wires
Al 1.2 - 1.6mm
Operating temperature range -20…+40°C
Storage temperature range -40…+60°C
Minimum cooling power at1.6l/min* 1.9kW
Minimum flow rate 1.6l/min
Pistol grip handle Yes
Changeable neck No
Rotating neck No
Length x (see figure
below)
132mmNeck dimensions
Height y (see figure
below)
104mm
Neck angle ɑ (see figure below) 50°
Standards IEC 60974-7
*Gun length 8 m
OPERATING MANUAL | EN 189
©
KEMPPI | 2018-09-28