Kemppi X8 MIG User Manual

X8 MIG WELDER 1.1 Symbols
1 Read first
Kemppi takes special care in informing its customers about the safety of our products. We also mind the
environment and aspire to disposing of our products according to specified European Directives.
1.1 Symbols
Items in the manual that require particular attention, to minimize damage and personal harm, are indicated
with a three-level notification and warning system.
Convention Used for
Note:
Note text here.
Gives the user a piece of information of particular importance.
Caution:
Caution text here.
Describes a situation that may result in damage to the equipment or
system.
Warning:
Warning text here.
Describes a potentially dangerous situation that may result in personal
damage or fatal injury.
Kemppi symbols
Table 1: Kemppi symbols used in this documentation
Symbol Description
CE mark
EMC Class A
This symbol indicates that the waste of electrical and electronic equipment
must not be disposed as unsorted municipal waste and must be collected
separately. Contact an authorized representative of the manufacturer for
information concerning the decommissioning of your equipment.
Coolant input
OPERATING MANUAL | EN 4
©
KEMPPI | 2018-09-28

Kemppi X8 MIG Specifications

General

Brand	Kemppi
Model	X8 MIG
Category	Welding System
Language	English