X8 MIG WELDER 2.1 System introduction
2 X8 MIG Welder
These instructions describe the use of Kemppi's X8 MIG Welder, the top-class welding system for demanding
industrial use. The system consists of a power source, wire feeder, welding gun, Control Pad and various
welding software components and connectivity to Kemppi cloud services. Read the instructions through
carefully.
Disclaimer
While every effort has been made to ensure that the information contained in this guide is accurate and
complete, no liability can be accepted for any errors or omissions. Kemppi reserves the right to change the
specification of the product described at any time without prior notice. Do not copy, record, reproduce or
transmit the contents of this guide without prior permission from Kemppi.
2.1 System introduction
X8 MIG Welder is a multi-process welding equipment intended for demanding professional use in general or
heavy fabrication. The welding system is suitable for various MIG/MAG processes (MIG, 1-MIG, Pulse, DPulse,
WiseRoot+, WiseThin+ ) as well as MMA welding and gouging, cladding and brazing.
1. X8 Power Source 400/500/600
• Includes all the software, welding programs and memory channels for the welding system
• Connects to one or two X8 Wire Feeders
2. X8 Wire Feeder
• Operates with several wire spool types (some of which require an adapter)
• Connects to an external wire drum
OPERATING MANUAL | EN 8
©
KEMPPI | 2018-09-28
To Next Page
Loading...
Need help?
General
