Kemppi X8 MIG User Manual

X8 MIG WELDER 2.3 Installation
Note:
The mounting pins are different: The drive rolls' mounting pins have a circular mark on the
top, while the pressure rolls' mounting pins have no marks. The pressure rolls' mounting pins
have central axles attached to them, so the drive and pressure rolls' mounting pins cannot be
confused with each other.
3.
Pull the drive rolls upwards (1) and the pressure rolls out of their slots (2).
OPERATING MANUAL | EN 39
©
KEMPPI | 2018-09-28

Kemppi X8 MIG Specifications

General

Brand	Kemppi
Model	X8 MIG
Category	Welding System
Language	English