and will show one of the following opening menus, depending on the type of
SET LOADED and will show one of the following opening menus, depending on the type of SET LOADED
Pump Set detected, and whether continuous or intermittent feeding mode has been selected.
may be primed automatically with a single button push, including the
flushing line if a Feed & Flush Set is loaded. The pump can also be primed in a more interactive method using the hold-
After a Pump Set has been loaded and the status line shows
(Figure 7) to get one of the
PRIME PUMP menus shown in Figure 8. PRIME PUMP
for Intermittent Feed mode with a
for Intermittent Feed mode
menu for Feed & Flush set.
© 2005 Tyco Healthcare Group LP