KERN CFS User Manual

CFS/CCS-BA-e-1220 19
6.4.3 Display quantity
Here the current piece quantity (PCS = pieces) or in totalizing mode the sum
Sum of the placed parts is displayed, see chapter 10
The arrows [] above the symbols show:
Tolerance control in counting mode
Tolerance control in weighing mode
+
Goods to be weighed above tolerance limit
TOL
Goods to be weighed within tolerance range
-
Goods to be weighed below tolerance limit

KERN CFS Specifications

General

Plate material	stainless steel
Readability	0.01 g
Reproducibility	0.01g
Calibration	External calibration
Display	LCD
Weighing units	g, lb, oz
Operating temperature	10 °C - 40 °C
Functions	counting, weighing
Interface	RS-232