KERN CFS - Average Piece Weight by Weighing (CFS 50 K-3); Setting Reference and Counting Items (CFS 50 K-3)

CFS/CCS-BA-e-1220 45
11.1.2 CFS 50K-3 models:
Set reference
 Reset balance to zero or tare the empty weighing container if necessary.
 Place on the weighing plate a known number (e.g. 10 items) of individual pieces
as a reference.
Wait for the stability display, than enter the number of individual items via the
numeric keypad.
Confirm within 5 sec by pressing .
The balance determines the average piece weight.
Count the items
 Tare if necessary, place weighing good and read off the number of items.
When an optional printer is connected, the displayed value can be edited by
pressing (menu settings „P mode“  „Print“  „Au OFF“, chap. 13.2).
Delete reference value
 Press