KERN CFS User Manual

64 CFS/CCS-BA-e-1220
13 Menu
The menu is structured in the following menu blocks.
1.
Balance and application settings
2.
Settings serial interface
3.
Setting user identification number
4.
Setting balance identification number
5.
Configuration balance or balance bridge
13.1 Navigation in the menu
Call up menu
 Turn on balance and during the self-test press
PRE-SET The first menu block is displayed.
Select menu block
 Using or in CFS 50K-3 models the separate
menu blocks can be accessed in succession.
Select menu item
 Confirm selected menu block with TARE. The first menu
item is displayed, e.g.z.B. 
 Using or in CFS 50K-3 models the separate
menu items can be accessed in succession.
Select setting
 Confirm selected menu point with TARE. The current
setting will be displayed.
Change settings
 Using or in CFS 50K-3 models one can switch
to the available settings.
Acknowledge setting /
exit the menu
 Press TARE , the balance will return to submenu
 Set further settings either in the menu or with or
in CFS 50K-3 models return to the main menu.
Return to weighing
mode
 Press again or in CFS 50K-3 models

KERN CFS Specifications

General

Plate material	stainless steel
Readability	0.01 g
Reproducibility	0.01g
Calibration	External calibration
Display	LCD
Weighing units	g, lb, oz
Operating temperature	10 °C - 40 °C
Functions	counting, weighing
Interface	RS-232