KERN CFS User Manual

CFS/CCS-BA-e-1220 39
10.1.2 Manual Adding CFS 50K-3 models
With this function the individual weighing values are added into the summation
memory by pressing and edited, when an optional printer is connected.
Add up:
 Place weighing goods A.
Wait until the stability display appears, then press . The weight value or the
number of items are stored and printed out.
 Remove the weighed good. More weighed goods can only be added when the
display ≤ zero.
 Place goods to be weighed B.
Wait until the stability display appears, then press . The weight value or the
number of items are added in the summation memory and printed out. Total
weight, number of weighing procedures as well as total parts counting appear 2
sec.
 Add more weighed goods as described before.
Please note that the balance must be unloaded between the individual
weighing procedures.
 This process can be repeated 99 times or until the weighing range of the
balance is exhausted.
 This operation can be repeated until 999999 or 199999 is shown on the display

KERN CFS Specifications

General

Plate material	stainless steel
Readability	0.01 g
Reproducibility	0.01g
Calibration	External calibration
Display	LCD
Weighing units	g, lb, oz
Operating temperature	10 °C - 40 °C
Functions	counting, weighing
Interface	RS-232