KERN CFS - Remote Control Instructions and Commands; Control and Printing Command Reference

78 CFS/CCS-BA-e-1220
16.3 Remote control instructions
All inputs finish with <CR><LF> (carriage return / line feed).
At wrong inputs the command will be preceded by "ER", e.g. order "NN<CR><LF>",
error message "ER NN<CR><LF>".
16.3.1 Control commands
PLU
xx
Call-up PLU from data memory
T
Tare placed weighing vessel
T123.456
Numeric tare value
Z
Zeroing
P
Printing
M+
Add and print weighing data in the summation memory
MR
Call-up data from memory
MC
Delete memory
U123.456
Save the average piece weight 123.456 [g] or [lb]
S123
Input number of pieces e.g. 123 pieces
SL
Switch over to reference balance
SR
Switch over to bulk material scales
16.3.2 Printing commands
\L
Selection reference or bulk material balance
\I
User identification number
\S
Balance identification number
\N
Net weight
\G
Gross weight
\U
Average piece weight
T
Tare value
\P
Counting
\C
Total number of pieces
\W
Total weight
\M
Number weighing processes
\B
Insert space line