KERN CFS - Tolerance Control in Counting Mode Setup; Setting Upper and Lower Item Limits for Counting

CFS/CCS-BA-e-1220 51
The information if the goods to be weighed are within the tolerance limits, can
additionally be given by an acoustic signal (menu item „ „ see chap. 13.2)
For tolerance control, also only one limit value can be set.
If both limit values are deleted, the tolerance control is deactivated.
12.2 Tolerance control in counting mode
Operation
Display
 Press , the active tolerance weighing mode is
indicated.
 If necessary select with . or (CFS 50K-3
models) „Tolerance control counting mode“
[ ].
 Press , the currently set upper limit value is
displayed.
 Using numeric keyboard enter desired value e.g. 50
items or delete using .

 Press , the currently set lower limit value is
displayed.
 Using numeric keyboard enter desired value e.g. 40
items or delete using .
