KERN CFS - Tolerance Mark Interpretation (CFS 50 K-3); Understanding Tolerance Marks in Weighing (CFS 50 K-3)

50 CFS/CCS-BA-e-1220
Modelle CFS 50K-3 models:
 Press , tolerance control is started. The  symbol over appears.
 Place the weighing goods and with help of the tolerance mark  check if the net
weight of the weighed goods is under, within or over the specified tolerance.
Display of tolerance mark , if weighing goods are under the specified tolerance:
Display of tolerance mark , if weighing goods within the specified tolerance:
Display of tolerance mark , if weighing goods above the specified tolerance: