EasyManuals Logo

KERN CFS User Manual

KERN CFS
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
48 CFS/CCS-BA-e-1220
12 Weighing to a certain target weight /target quantity and
tolerance control
The balance allows weighing of goods to a certain target weight (net weight) or
target piece number within defined tolerances. With this function one can also
check if the weighing good is within a defined tolerance range. Tolerance control is
possible in weighing or target mode.
Reaching the target value is indicated by an acoustic (if activated in menu) and an
optic signal (tolerance mark ).
12.1 Tolerance control in weighing mode
Operation
Display
Press , the active tolerance weighing mode is
indicated.
If necessary select with or (CFS 50K-3
models) „Tolerance control weighing mode“
[ ].
Press the key TARE, which shows the currently set
upper threshold.
Using numeric keyboard enter desired value or
delete using .
Press the key TARE which shows the currently set
lower threshold.
Using numeric keyboard enter desired value or
delete using .

Table of Contents

Other manuals for KERN CFS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KERN CFS and is the answer not in the manual?

KERN CFS Specifications

General IconGeneral
Plate materialstainless steel
Readability0.01 g
Reproducibility0.01g
CalibrationExternal calibration
DisplayLCD
Weighing unitsg, lb, oz
Operating temperature10 °C - 40 °C
Functionscounting, weighing
InterfaceRS-232

Related product manuals