KERN CFS User Manual

38 CFS/CCS-BA-e-1220
Add up:
 Place weighing goods A.
Wait until the stability display appears, then press . The weight value or the
number of items are stored and printed out.
 Remove the weighed good. More weighed goods can only be added when the
display ≤ zero.
 Place goods to be weighed B.
Wait until the stability display appears, then press . The weight value or the
number of items are added in the summation memory and printed out. Total
weight, number of weighing procedures as well as total parts counting appear 2
sec.
 Add more weighed goods as described before. Please note that the balance
must be unloaded between the individual weighing procedures.
 This process can be repeated 99 times or until the weighing range of the balance
is exhausted.
Display of the saved weighing data:
 Press , the total weight, number of weighing procedures as well as total
number of items are displayed.
Total weight placed on
balance:
Number of weighing
procedures:
Total number of pieces:
Delete weighing data:
 Press , the total weight, number of weighing procedures as well as total
number of items are displayed. During this display press . The data in the
summation memory are deleted.

KERN CFS Specifications

General

Plate material	stainless steel
Readability	0.01 g
Reproducibility	0.01g
Calibration	External calibration
Display	LCD
Weighing units	g, lb, oz
Operating temperature	10 °C - 40 °C
Functions	counting, weighing
Interface	RS-232