KERN CFS User Manual

CFS/CCS-BA-e-1220 23
 Tolerance control,
see chap. 12
Call up menu
Select memory locations
Switch-over balance,
see chap. 9.3
At numeric input digit
selection to the left
Input of the average piece
weight by weighing, see
chap. 11.1
Function /parameter
selection
Numeric input of the
average piece weight see
chapter 11.2
Switch-over weighing unit
Taring key
Confirm
Zeroing key
At numeric input digit
selection to the right
Back to menu
or in weighting mode

KERN CFS Specifications

General

Plate material	stainless steel
Readability	0.01 g
Reproducibility	0.01g
Calibration	External calibration
Display	LCD
Weighing units	g, lb, oz
Operating temperature	10 °C - 40 °C
Functions	counting, weighing
Interface	RS-232