72 CFS/CCS-BA-e-1220
CFS 50K-3 models:
Reference balance: „tECH LoCAL“
Navigation in the menu
With help of , the individual menu items can be selected
one after the other.
Confirm selected menu item by pressing . The current
setting will be displayed.
Switch into the available settings using .
Either save by pressing or cancel by pressing .
Parameter selection
Display internal resolution
Press , „CAP.“ is displayed
Balance capacity.
Settings only possible on the bulk material balance.
Press „rES“ is displayed
Press , the current setting for resolution are displayed
Select desired resolution by pressing .
Acknowledge by .
Press , „A2t“ is displayed
Automatic zero point correction (Autozero) by changing the
display, digits selectable (0.5d, 1d, 2d, 4d)
Press , the currently set value is displayed.
Press to select the desired setting (0.5d, 1d, 2d, 4d) and
acknowledge by pressing .
To Next Page
Loading...
