FAST KEY MENUS
To facilitate a fast access to commonly used options on the menus, use the
‘fast’ keys on the keyboard. These are located below the display. These
correspond to the key name on the bottom of the screen.
How to....
The remainder of this chapter has been sub-divided into sections describing
the Tester in terms of the essential functions to be performed. A summary
is shown below: -
How to perform Automatic tests•
How to use the Meter display•
How to view test results•
How to perform Manual tests•
How to download Data•
How to print Barcode Labels•
How to use Setup•
How to use the memory•
How to change the user•
How to use Help•
HOW TO PERFORM AUTOMATIC TESTS
To perform automatic tests, use the cursor keys to highlight the New Test
option on the Main Menu and press Enter to display the following menus: -
Use the keyboard or a compatible Barcode Reader to enter an Appliance
Number.
Note
See Chapter 4 for tips on using barcodes.
If you need to change the current Site use the cursor keys to highlight SITE
and press Enter to change the Site Name.
FAST KEY MENUS
HOW TO PERFORM AUTOMATIC TESTS
To Next Page
Loading...
Need help?
General
