HOW TO PRINT BARCODE LABELS AND TESTCODES
Beep on Warning
Use the cursor keys to highlight the option and press Enter to select the
desired option.
This option will cause a beep whenever a warning message is displayed or a
test fails.
Saving User Settings
In the EDIT USER SETTINGS, highlight OK and press the Enter button or
select the OK Fast key. The user settings will then be saved.
Edit Site List
Use the cursor keys to highlight a Site name and press Enter to select the
desired option.
Note
If you change the name of the Site during testing all of the previous
tests will still be referenced to the old Site name, this gives
unlimited amounts of Sites within the test results memory.
Use the keyboard to edit the name of the Site and press Enter to save and
return to the previous menu. Press the Red button to return to the previous
menu without saving changes.
Edit Location List
Use the cursor keys to highlight a Location name and press Enter to select
the desired option.
Note
If you change the name of the Location during testing all of the
previous tests will still be referenced to the old Location name, this
gives unlimited amounts of Locations within the test results memory.
When choosing to edit a Location the name of the Location will be shown in
the box. Use the keyboard to edit the name of the Location and press Enter
to save and return to the previous menu. Press the Red button to return to
the previous menu without saving changes
To Next Page
Loading...
Need help?
General
