HOW TO USE THE METER DISPLAY
Test in Progress Icon
Indicates test in progress with voltage warning.
Test Duration Counter
Indicates duration of test. This will count down, when the counter reaches
zero if the Tester is still taking a measurement the counter will flash.
Primary Display
Indicates test result or pass/fail limit.
Secondary Display
Indicates test output e.g. voltage or current.
Connection Icon
Indicates connection required for external probes.
Test Icon
Indicates the test selected.
Earth Bond
No Probe
IEC Lead
Earth Bond
Substitute Leakage
Leakage & Load
Polarity
Insulation
Flash
Touch
Leakage
Low Voltage
High Voltage
Applying Power
Visual
To Next Page
Loading...
Need help?
General
