Kewtech KT77 User Manual

44
www.kewtechcorp.com
45
www.kewtechcorp.com www.kewtechcorp.com
Create Appliance Number
This allows all manual tests performed to be stored against the appliance
number until the appliance number is changed.
Use the keyboard or compatible Barcode Reader to enter an Appliance
Number.
Note
See Chapter 4 for tips on using barcodes.
For Pat Manager PC software users the ‘SITE’ and ‘LOCATION’ descriptions
should only be entered as 10 characters
HOW TO PERFORM MANUAL TESTS
If you need to change the current Site use the cursor keys to highlight SITE
and press Enter to select another Site name.
Use the cursor keys to highlight a Site name and press Enter to select the
desired option.
If you need to change the current Location use the cursor keys to highlight
LOCATION and press Enter to change the Location name.
Use the cursor keys to highlight a Location name and press Enter to select
the desired option.
Note
Default settings for Sites and Test Sequences are pre-loaded into
the Tester. See ‘How to use Setup’ to change these settings.
HOW TO PERFORM MANUAL TESTS
------SELECT SITE------
SITE 1
SITE 2
SITE 3
--SELECT LOCATION--
WORKSHOP
LOC. 2
LOC. 3

Kewtech KT77 Specifications

General

Brand	Kewtech
Model	KT77
Category	Test Equipment
Language	English