2
●Motor power indicator
●PAS level adjustment and indicator
●Speed function (incl. real speed, Max. speed and Avg. speed)
●Distance（Trip and ODO）
●6km/h push assistance
●Trip time
●Backlight
●Error code
●USB connection
●Various Parameters Settings (e.g., wheel size, speed-limited, battery capacity
setting, assistance level etc.)
General Operation
◆Definition of Button
KD86 display matches K41-N/K42/K43/K5 buttons.
K41-N/K42/K43 has 4 buttons: including on/off, i key, plus key, minus key/boost key;
in the subsequent description, the on/off button is replaced by the word "ON/OFF"; i The
key is replaced with the word "i"; the plus key is replaced with the word "UP"; the
minus/boost key is replaced with the word "DOWN".
K5 has 5 buttons: including on/off, i key, plus key, headlight key, minus key/boost key;
in the subsequent description, the on/off key is replaced by the word "ON/OFF"; the i key
is The word "i" is replaced; the plus key is replaced with the word "UP"; the minus/boost
key is replaced with the word "DOWN".
◆Power on/off
After long pressing the "ON/OFF" button for 2 seconds, the display turns on and the
entire system works normally. In the power-on state, long press the "ON/OFF" button to
turn off the power of the e-bike In the shutdown state, the display no longer uses battery
power, and the leakage current of the meter is less than 1uA.
■When parking the E-bike for more than 5 minutes, the E-bike system switches off
automatically.
◆Display Interface
After switching on the E-bike system, the display will show Real Speed and Trip
Distance (KM) as default. Pressing the “i” button to switch between following items:
Trip (Km) →ODO (Km) → Avg. Speed (Km/h)→Max. Speed (Km/h)→Trip Time (Min.)
To Next Page
Loading...
