4
decreases. Press and hold the "UP" button again for more than 2 seconds to turn off the
headlights and restore the backlight brightness.
Headlight Interface
◆PAS level
Short press the "UP" or "DOWN" button to switch the power assist gear of the electric
vehicle and change the output power of the motor. The default output power range of the
display is PAS level 0-5. PAS level 0 stop power output, PAS level1 is the minimum power,
PAS level 5 is the maximum power. As shown in the figure, it is PAS level 1.
Assist Level Interface
◆Motor Power
The power of the motor can be read via the interface, like the following picture.
Motor Power Display Interface
To Next Page
Loading...
