Remote Operations 6
Keysight 11713D/E Operating and Service Manual 65
LAN configuration
The 11713D/E has three LAN operating modes:
– Dynamic mode (Dynamic Host Configuration Protocol or DHCP)
– Auto IP mode (Local PC Control or isolated LAN)
– Static mode (Manual mode)
Refer to “Connecting over LAN” on page 94 to configure the above LAN operating modes.
Before connecting the USB cable, make sure that I/O software is installed on
your computer.
For more information about Keysight IO Libraries software, refer to the
Connectivity Guide. If you have installed other I/O software, refer to the
documentation that accompanies the software.
To Next Page
Loading...
